03-17-2010 07:44 AM - edited 03-06-2019 10:10 AM
Hi,
In our network intially we had 800mb of traffic flow between our site1 to site2 with point to point 1 gig connectivty in the cat 6500 with SUP 2 on both the site
on 1 site we upgraded the SUP2 to SUP720 last night and we din see any issues but when 600mb traffic flow started in mid day we had a issue that from site 1 to site 2 no connectvity isssues but icmp from site2 to site1 is giving issue
the interface traffic size
5 minute input rate 637419000 bits/sec, 464796 packets/sec site2 to site1
5 minute output rate 630223000 bits/sec, 465577 packets/sec site1 to site 2
we suspecting some interface traffic ratelimit issue since we din face the issue in the morning when we have 500mb of traffic
we have the below config on our new SUP720 catalayst whether this will be rootcause
no mls acl tcam share-global
mls aging long 64
mls aging normal 32
mls netflow interface
mls rate-limit unicast cef glean 20000 60
mls rate-limit unicast ip rpf-failure 500 10
mls rate-limit unicast ip icmp redirect 0
mls rate-limit unicast ip icmp unreachable no-route 500 10
mls rate-limit unicast ip icmp unreachable acl-drop 500 10
mls rate-limit unicast ip errors 500 10
mls rate-limit all ttl-failure 10 1
mls verify ip length minimum
mls cef error action reset
thanks
Vinu
03-24-2010 11:43 PM
Thanks a lot for your information
Iam seeing some output drops
6506-SW-A#$ interface gigabitEthernet 4/11 | include qos3Outlost
53. qos3Outlost = 837682147
6506-SW-A#$ interface gigabitEthernet 4/12 | include qos3Outlost
53. qos3Outlost = 837682147
6506-SW-A#$ interface gigabitEthernet 4/13 | include qos3Outlost
53. qos3Outlost = 837682147
6506-SW-A#$ interface gigabitEthernet 4/14 | include qos3Outlost
53. qos3Outlost = 837682147
6506-SW-A#$ interface gigabitEthernet 4/15 | include qos3Outlost
53. qos3Outlost = 837682147
6506-SW-A#$ interface gigabitEthernet 4/16 | include qos3Outlost
53. qos3Outlost = 837682147
6506-SW-A#$ interface gigabitEthernet 4/17 | include qos3Outlost
53. qos3Outlost = 14694
6506-SW-A#$ interface gigabitEthernet 4/18 | include qos3Outlost
53. qos3Outlost = 14694
6506-SW-A#$ interface gigabitEthernet 4/19 | include qos3Outlost
53. qos3Outlost = 14694
6506-SW-A#$ interface gigabitEthernet 4/20 | include qos3Outlost
53. qos3Outlost = 14694
Thanks
vinu
On Wed, Mar 24, 2010 at 8:37 PM, giuslar
04-17-2011 11:16 PM
which commad do you use there ?
Thx
hubert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide