08-03-2010 07:13 PM - edited 03-06-2019 12:18 PM
I saw a Cisco Nexus 5010 and it has 5 RJ-45 port, 1 for Console, 2 for MGMT and another two port for what ??? L1 and L2, somebody can explain me that ?? Thank yuo so much !!!
Solved! Go to Solution.
08-03-2010 08:08 PM
Konus,
The defect id is to document that the ports are not usable, this was not documented. ( did not intend to confuse you).
The first 8 ports on 5010 can be used to as 1 gig ports with GLC-T= transceiver.
JayaKrishna
08-03-2010 07:31 PM
Hi ,
Only one port works our of those 4 ports. L1/L2/MGMT1 are not usable yet and will be used in future. A document defect is opened to document this. Defect id: CSCth37349
Hope that answers your question.
JayaKrishna
08-03-2010 07:56 PM
Thank you so much for your quick feedback JayaKrishna, but right now I'm more confused than before:
Waht is a Defect ID: CSCth37349 ?
All usable ports on that switch (Nexus) are SFP, is there any adapter that permits to connect NIC server or NIC pc to the Nexus through RJ-45 and UTP cable?
Thank you so much
08-03-2010 08:08 PM
Konus,
The defect id is to document that the ports are not usable, this was not documented. ( did not intend to confuse you).
The first 8 ports on 5010 can be used to as 1 gig ports with GLC-T= transceiver.
JayaKrishna
08-03-2010 09:52 PM
Thank you So Much Jaya.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide