07-18-2011 08:21 AM - edited 03-07-2019 01:16 AM
How can I know the names of all of the interfaces (e.g. GigabitEthernet0/1 ..) that are present in a specific product model?
I need to know the exact names of all the WS-2960S-24PS-L interfaces but I don't have one to type "show interface brief" on.
I need to know if the 4 SFP ports are called GigabitEthernet 0/25, GigabitEthernet 0/26, GigabitEthernet 0/27, GigabitEthernet 0/28 or
GigabitEthernet 1/1, GigabitEthernet 1/2, GigabitEthernet 1/3, GigabitEthernet 1/4 ore some other ways.
Can anyone paste the result of "show ip interface brief"?
Is there a place where I can find this information without having the router accessible?
Thank you.
Alberto
07-18-2011 03:52 PM
Is this what you are looking for?
Gi1/0/1 connected 5 a-full a-10 10/100/1000BaseTX
Gi1/0/2 connected 5 a-full a-10 10/100/1000BaseTX
Gi1/0/3 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/4 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/5 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/6 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/7 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/8 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/9 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/10 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/11 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/12 notconnect 5 auto auto 10/100/1000BaseTX
Gi1/0/13 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/14 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/15 connected 1 a-full a-10 10/100/1000BaseTX
Gi1/0/16 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/17 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/18 connected 1 a-full a-10 10/100/1000BaseTX
Gi1/0/19 connected 1 a-full a-10 10/100/1000BaseTX
Gi1/0/20 connected 1 a-full a-10 10/100/1000BaseTX
Gi1/0/21 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/22 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/23 connected 3 a-full a-1000 10/100/1000BaseTX
Gi1/0/24 connected 3 a-full a-1000 10/100/1000BaseTX
Gi1/0/25 connected 3 a-full a-1000 10/100/1000BaseTX
Gi1/0/26 connected trunk a-full a-1000 1000BaseSX SFP
Fa0 disabled routed auto auto 10/100BaseTX
07-20-2011 04:08 AM
Thanks leolaohoo!
I see 25 ports BT in your switch. The WS-2960S-24PS-L, has 24 ports. You have added an electrical port on the 25th?
I see that you have only one SFP installed, is this right?
Thanks
Alberto
07-20-2011 04:38 AM
I see 25 ports BT in your switch.
Whoopsie. Me bad. That's Gi 1/0/25 is suppose to be a 1Gb SFP interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide