cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5301
Views
0
Helpful
1
Replies

cisco show logs Router ISR

m.malqui1
Level 1
Level 1

Hi all,

Please how can I show interface log for exemple up time down time ...?

And how can I show log event in the ISR4331?

Thanks in advance

Regards,

 

1 Reply 1

Mark Malone
VIP Alumni
VIP Alumni
show logging is the command to see the logs in a router , you could check your logs and filter on the interface

you can increase the logging buffer with logging buffered xxx or else send them to a syslog logging host x.x.x.x

#sh log | i Interface Serial0/1/0:1
003461: Feb 15 10:42:11.461 UTC: %ISDN-6-CONNECT: Interface Serial0/1/0:1 is now connected to 2002 N/A
003462: Feb 15 10:42:17.841 UTC: %ISDN-6-DISCONNECT: Interface Serial0/1/0:1 disconnected from 4989930882112 , call lasted 6 seconds
003528: Feb 16 09:22:58.367 UTC: %ISDN-6-CONNECT: Interface Serial0/1/0:1 is now connected to 8251662 N/A
003529: Feb 16 09:28:20.945 UTC: %ISDN-6-DISCONNECT: Interface Serial0/1/0:1 disconnected from 704383812 , call lasted 322 seconds
Review Cisco Networking for a $25 gift card