Cisco SMB-SF 200-24 Interface does not load

[mbeurmann]

Hi,

I have a CISCO SMB-SF 200-24.  It has received a DHCP IP address.  When I follow the instructions in the Quick Start Guide to access the switch, the application does not fully load (I know its currently assigned IP address...).  As a result, my browser only displays part of the images on the page, which means that the application is basically unusable.

Please advise as to how I can correct this condition.

Michael Beurmann

[Reza Sharifi · Accepted solution]

Hi,

Have you tried a different browser?

HTH

[mbeurmann]

I am using IE. I tried Mozilla FF, but it was worse....

[Austin Sabio]

Try

• Install Active-X plug-in when prompts.
• IE9. 
• Java v7 or 6.

http://www.cisco.com/c/en/us/products/collateral/switches/small-business-200-series-smart-switches/data_sheet_c78-634369.html

Minimum Requirements

●  Web browser: Mozilla Firefox version 8 or later; Microsoft Internet Explorer version 7 or later, Safari, Chrome ●  Category 5 Ethernet network cable ●  TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network

Please rate, if helpful. 

Thank you.

[mbeurmann]

I have tried Google Chrome, and it seems to work just fine.  Thank you!

[Austin Sabio]

Great. I didn't see that. Glad it did work for you.