Cisco Switch 2960 issue (CPU rev: B)

[fadhil Sakin]

Hello,

I have an issue with cisco switch 2960, the color of ( SYS LED ) is red but when i turn off and turn on the switch the color of the LED became green but when i trying to login to the switch via (Tera Term) this message pop up ((( CPU rev: B ))).

So, can you help me because it's urgent.

Thanks in advance.

Fadhil Sakin

[Mark Malone]

that's looks like something from the post test when the router boots up it goes through a diag check , did anything else appear ?

do you have any access or is it stuck on that ?

CPU rev: B Image passed digital signature verification

Board rev: 5 Testing DataBus... Testing AddressBus... Testing Memory from 0x00000000 to 0x1fffffff...  - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / Using driver version 3 for media type 1

Xmodem file system is available.

Base ethernet MAC Address: 54:4a:00:ec:79:80

The password-recovery mechanism is enabled.

USB EHCI 1.00

USB EHCI 1.00

USB Console INIT

Initializing Flash...

mifs[5]: 12 files, 1 directories

mifs[5]: Total bytes     :    1806336

mifs[5]: Bytes used      :     833536

mifs[5]: Bytes available :     972800

[fadhil Sakin]

Thanks for reply.

Yes, it doesn't appear anything just as shown in the attached picture with this error ( CPU rev: B )

Now we have working on it on site and will check.

[Mark Malone]

hmm that's not good sounds as if its failing post startup test

if you can get in at all to normal ios , you could try break into rommon as it boots

[fadhil Sakin]

I can't do any action .. it seems died