Hi
Every time when i restrat the cisco switch 4948 it is going in rommon mode
then in rommon#boot
After enterning boot the ios of switch is working fine
the output of show version is shown below
Core#sh version
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICES-M), Version 12.2(53)SG2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 16-Mar-10 02:00 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11F06F90
ROM: 12.2(31r)SGA2
Dagobah Revision 226, Swamp Revision 5
Core uptime is 6 days, 23 hours, 38 minutes
System returned to ROM by power-on
System restarted at 04:34:17 UTC Sun Jan 24 2016
System image file is "bootflash:cat4500-entservices-mz.122-53.SG2.bin"
cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of memory.
Processor board ID FOX1419G0B8
MPC8245 CPU at 266Mhz, Fixed Module
Last reset from PowerUp
5 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
And the output of dir as shown below
Core#dir
Directory of bootflash:/
1 -rwx 17211120 Jan 21 2011 13:16:11 +00:00 cat4500-entservices-mz.122-53.SG2.bin
3 -rwx 19457008 Dec 2 2013 03:40:29 +00:00 cat4500-entservicesk9-mz.150-2.SG4.bin
60817408 bytes total (4691888 bytes free)
Core#
