cisco switch c3650 issue

[rajesh.bisht]

Dear Team

  I have cisco WS-C3650-24TS  Switch with IP service Licenses. 

and facing issue is i unable to use Ip Nat pool command on this which i needed .

[Leo Laohoo]

i unable to use Ip Nat pool command

Cisco Catalyst family of switches will NEVER support NAT.  

Only routers can support NAT.

[Glenn Martin]

Moving to the correct community.

[Julio E. Moisa]

Hi Rajesh,

NAT settings are not supported on this switch model, the following link could be useful, only 6500 switches and 5500 (with specific IOS) can support NAT. You need a router or firewall to configure NAT.

http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/29283-166.html

:-)