04-09-2007 03:55 AM - edited 03-05-2019 03:22 PM
Hi Experts
i have seen on my Cisco works an access switch has a read Color + ? on the image of this switch
what this does?
rergards
ALI
Solved! Go to Solution.
04-09-2007 04:15 AM
Ali,
Please find another link for device support on Cisco works with the required minimum IOS on the devices.This will come handy :
-amit singh
04-09-2007 04:03 AM
Ali,
The red color means that the device is unreachable by SNMP.Thsi could be due to incorrect SNMP community strings or SNMP timeouts. Please see the link below for the reasons and workaround for settings:
http://www.cisco.com/warp/customer/477/Campus/com_cwsi_4_top10.html#qa2
HTH,Please rate if it does.
-amit singh
04-09-2007 04:07 AM
HI amit!
PLZ GIVE Me another one for Public;what is explanation of the question Mark on the switch image?how can i fix it?
10xs Ali
04-09-2007 04:10 AM
Ali,
You should be able to access it now.
http://www.cisco.com/warp/public/477/Campus/com_cwsi_4_top10.html#qa2
-amit singh
04-09-2007 04:15 AM
Ali,
Please find another link for device support on Cisco works with the required minimum IOS on the devices.This will come handy :
-amit singh
04-09-2007 04:29 AM
Amit My Freind;10xs a lot for yr reply
Regards
Ali
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide