04-30-2011 01:11 PM - edited 03-06-2019 04:51 PM
HI all,
I have problem to setup ips on my router.
License Information for 'c880-data'
License Level: advsecurity_npe Type: Permanent
System image file is "flash:c880data-universalk9_npe-mz.151-1.T1.bin"
But cannot follow :
Step 4.1 is problem.
Router doesn't know the command : ip ips
Any advice will be appreciated.
Thanks
Pavel
Solved! Go to Solution.
05-01-2011 04:44 AM
Looks like you have an Advanced Security licence. I'm pretty sure that you need Advanced IP Services to run IPS in this platform. http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html
I believe you also need a separate IPS subscription to update the IPS definitions.
05-01-2011 04:44 AM
Looks like you have an Advanced Security licence. I'm pretty sure that you need Advanced IP Services to run IPS in this platform. http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html
I believe you also need a separate IPS subscription to update the IPS definitions.
05-01-2011 11:13 AM
Yes, you're right.
I've switched to advip, and command appeared.
What confuses me, is why advip?
I would expect IPS in security bundle, when it is security feature, more than ip service.....
But, thanks
Pavel
05-01-2011 11:23 AM
Advanced IP Services costs more - it has more features
05-02-2011 08:06 AM
Yes Adv Services is going to cost you more. With IOS 15 you have the option to try out the feature for up to 60 days, that gives you time to submit a PO and get the key, when you get the key you do not need to reboot the router! that's one nice feature of the new IOS platform.-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide