CiscoPOE3650 Port's status show Faulty.

[Wed245]

My switch cisco 3650poe port 24 show error Faulty My company often has power cuts. 
How can i resolve that?

PS: Please see attach picture.

Thank you 

  

[Leo Laohoo]

Post the complete output to the following commands: 

sh version
sh interface Gi 1/0/24 controll

IMPORTANT:  Do not post screenshots.

[Wed245]

GPL Version 2.0 

[Leo Laohoo]

---

@Wed245 wrote:
GPL Version 2.0 

---

Ok, if you want to play games, I will stop helping.

[Wed245]

I'm so sorry don't mean like that . I just beginner and never config before .I tried to check config from every and your suggestion. 
I don't know what part of message to take.
Thanks. for help

[DanielP211]

Hello!

What device is connecting to the port gig1/0/24? Could you connect the device on a different port? Also display show power inline.

I assume there could be an issue with the remote device or cabling. 

BR

[amikat]

Hi,

You can try to test int gi1/0/24 cabling using the "test cable-diagnostics tdr interface interface-id" command and check the result with the "show cable-diagnostics tdr interface interface-id" command. More details at the Command Reference as per beneath:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-12/command_reference/b_1612_3650_cr/system_management_commands.html#ref_1064068

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-12/command_reference/b_1612_3650_cr/system_management_commands.html#ref_1063729

Best regards,

Antonin