10-12-2009 07:12 AM - edited 03-06-2019 08:05 AM
All the servers have configured teh NTP server as local core switch ip at cincinatti NA.
Core switch itself configured teh NTP servers as Schaumberg switch ip.
when i checked teh ntp status at both schaumberg and cincinatti switches..i am having teh below error.But time at both switches is exactly showing.
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 250.0000 Hz, actual freq is 249.9978 Hz, precision is 2**18
reference time is CE70D244.2B189C90 (14:25:56.168 CDT Fri Oct 2 2009)
clock offset is 0.0315 msec, root delay is 24.81 msec
root dispersion is 50.06 msec, peer dispersion is 0.05 msec
error at server end is:
root@lnx102 ~]# ntpdate -q 10.9.0.2
server 10.9.0.2, stratum 16, offset 52.457689, delay 0.02585
12 Oct 08:24:26 ntpdate[15300]: no server suitable for synchronization found
[root@lnx102 ~]#
Please help me urgent in sync teh clock.
10-12-2009 07:26 AM
Please someone help..its priority 1 issue for us....more clients are affected
10-12-2009 05:37 PM
What's the result for the command "sh ntp a"? Can you post your NTP configuration including access list?
10-13-2009 12:43 AM
If it is that urgent, Cisco TAC is a better way to go than this forum.
HTH
10-13-2009 04:26 AM
This same question was posted in the WAN Routing and Switching forum where I posted a response asking for some additional information. If it is so urgent, why has there been no response to my post?
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide