hello,all
The following are some QOS commands configured at some interface on Catalyst 3550 switch.
interface FastEthernet0/1
switchport access vlan 31
switchport mode access
switchport voice vlan 40
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
wrr-queue bandwidth 20 1 80 1
wrr-queue min-reserve 1 5
wrr-queue min-reserve 2 6
wrr-queue min-reserve 3 7
wrr-queue min-reserve 4 8
wrr-queue cos-map 1 0 1 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
spanning-tree portfast
And now,there is a Catalyst 3560 switch needing to configure QOS the way as above commands.but no wrr-queue exsits on Catalyst 3560,what commands can be used to replace them.Thanks!
Respects!
Minquan Kuo