Hi guys,
We wanted to upgrade the current version on our Catalyst 3850 switch from 3.6.6E to 16.3.6. I noticed commaned "epm access-control open" is not available on iOS Denali 16.3.6 any more. Please see CLI output below,
<
c3850(config)#epm ?
logging Enable EPM logging
c3850(config)#epm access-control open
^
% Invalid input detected at '^' marker.
>
According to the Command Reference, Cisco IOS XE Denali 16.3.x (Catalyst 3850 Switches), this command is still available which was listed out in page 911. URL of the Command Reference is here: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-3/command_reference/b_163_consolidated_3850_cr.pdf
The version the switch is running with is,
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 32 WS-C3850-24P 16.3.6 CAT3K_CAA-UNIVERSALK9 INSTALL
Can someone please let me know whether the pdf is out of date or whether I installed a wrong image?
Thanks heaps,
Eric