Computers on my Access Point isn’t showing computers on my switch

[AdesoyeJR]

Hello guys, I have a slight problem. I have a Cisco Switch, an Access Point, and a modern.

The modern is connected to switch.

4 Computers are connected directly to the Switch, my Access Point also is connected to the Switch, and 3 systems are connected directly to the Access Point.

The 4 computers on the Switch are only accessible to each other, that is, I can’t  access any of the computers connected to the Access Point.

So as to the 3 computers connected to the Access Point, they’re only accessible to each other.

But I can browse the internet on all the computers.

(NB: All connections are LAN)

Please whats the solution so I’ll b able to accessible all computers on the network?

[Reza Sharifi]

Hi,

Are the devices connected to access point in the same vlan as the devices that are directly connected to the switch? If they are in different vlans, you may need to turn on "ip routing" on the switch so, it can route between vlans.

HTH