12-17-2011 06:43 AM - edited 03-07-2019 03:56 AM
two building , building A has dmz with this network 95.0.0.x and building B has
dmz with this network 97.1.0.x i have clint
on building A want to work with dmz on building B and the the same on building B want to work on dmz on building A
there is fiber cable between a and b
on building A 3570 and on building b 3com
how can configure to working both dmz on each building
Sent from Cisco Technical Support iPhone App
12-17-2011 07:21 AM
If the physical layer connected? Do you have link lights on both sides of the connections?. What port on the 3750 is being used? In the interface in up and up mode?
12-17-2011 08:55 AM
yes
but i need to put on vlan
Sent from Cisco Technical Support iPhone App
12-17-2011 06:18 PM
thanks you
now network work fine
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide