Configuration register is 0xF

kuldeep.kaur · ‎11-24-2008

Hi Guys,

I have made some changes to the switches and the I save the config. After few days there was an power outage and when the switches restarted it lost all the changes I made.

The switch is set to

what does the above mean.

If this is not correct what value should I used so that it can use the changes which I made next time when it reboots.

Tks

johnlloyd_13 · ‎11-25-2008

what model and IOS for the switch? if it's a 2960, then 0xF is the default and recommended configuration register and is not changeable.