Configuring IP of untagged VLAN

[gnanavel.ns]

Hi,

I will be connecting a Router LAN port to a trunk port in a switch. The trunk will carry VLAN 320 and VLAN 1, which will be untagged. The management network is carried in VLAN 1. If I have to configure the IP of VLAN 1 in Router, should I configure it in the main interface (with VLAN 320 IP in the sub interface .320 with dot1q encap)?

Regards

Gnanavel.

[Jon Marshall]

Should work either so yes you can do it as you suggest.

Jon