Configuring Nexus switch as a radius client for Windows NPS

[richardacarey]

Hello,

I was looking for some straight forward documentation/information on how to configure RADIUS for a Nexus switch using Server 2008 R2 as the RADIUS server both from the Nexus side and the Windows side. I have had no luck finding anything that works thus far. Any insight or help would be greatly appreciated.

Thanks!

[Stuart D Fordham]

I got this working today (with the Titanium emulator, but its the same command sequence for the physical switches).

http://www.802101.com/2013/08/cisco-nexus-and-aaa-authentication.html

Hope it helps.