Hi everyone,
please am having issues establishing connectivity between the two locations as shown below,i would like to know why the second inteface (B-R2) is showing up up without ip address assigned to it.could be the reason why connection cannot be established.
thanks
B- R1
Serial0/3/1:0 10.99.4.46 YES NVRAM up up
interface Serial0/3/1:0
ip address 10.99.4.46 255.255.255.252
B- R2:
serial0/3/1:0 unassigned YES NVRAM up up
interface Serial0/3/1:0
no ip address
sa-R1:
serial0/3/0:0 10.99.4.121 YES NVRAM up up
interface Serial0/3/0:0
ip address 10.99.4.121 255.255.255.252
SA-R2:
Serial0/3/0:0 10.99.4.125 YES manual up up
interface Serial0/3/0:
ip address 10.99.4.125 255.255.255.252
