cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1119
Views
0
Helpful
2
Replies

Console Message "mifs ifs_read 0 bytes"

MaxFisher925
Level 1
Level 1

Hello,

 

We recently acquired some WS-C2960S-48FPS-L switches.  Almost every one of the switches shows this message on the console when connected via console cable.  Is this benign?

Switching, Catalyst 2000

switch#mifs ifs_read 0 bytes
2 Replies 2

marce1000
VIP
VIP

 

   - Try fsck flash: and or use latest advisory software release , check if  that can help : https://software.cisco.com/download/home/282864101/type/280805680/release/15.2.2E9

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Hello,

 

as far as I recall. anything 'ifs' refers to the integrated file system, which is basically the name for all the file systems available on your switch (you can display those with the exec commands 'showfilesystems/show file system/show file descriptors).

 

The document below is an interesting read:

 

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ifs/configuration/15-s/ifs-15-s-book/ifs-using.html

Review Cisco Networking for a $25 gift card