@Jon Marshall
Pls, I need your guidance,
exceeded 433965808 packets action: drop <<- Please can you tell me how to find out the exact type of Packets dropped, I know the class-map doesn't have any corresponding ACL match statement
OR is HSRPv2 packets matched on this default class-map( class-copp-mcast-v4-data-on-routedPort (match-any)) ? Then if not, which then.
Thanks in advance
switch#show policy-map interface
Control Plane Interface
Service-policy input: policy-default-autocopp
Hardware Counters:
class-map: class-copp-mcast-v4-data-on-routedPort (match-any)
Match: none
police :
10 pps 1 limit 1 extended limit
Earl in slot 5 :
433965808 packets
5 minute offered rate 9 pps
aggregate-forwarded 0 packets
action: drop
exceeded 433965808 packets action: drop
aggregate-forward 0 pps exceed 9 pps
Software Counters:
Class-map: class-copp-mcast-v4-data-on-routedPort (match-any)
0 packets, 0 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: none
0 packets, 0 bytes
5 minute rate 0 bps
police:
rate 10 pps, burst 1 packets
conformed 0 packets, 0 bytes; action:
drop
exceeded 0 packets, 0 bytes; action:
drop
conformed 0 pps, exceeded 0 pps
switch#show ver
Cisco IOS Software, c6880x Software (c6880x-ADVENTERPRISEK9-M), Version 15.4(1)SY1, RELEASE SOFTWARE (fc8)
