cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2856
Views
6
Helpful
6
Replies

Copper SFP for C9300X-24Y-A

inhamit
Level 1
Level 1

Hi, I am looking for Copper SFP for C9300X-24Y-A switch to insert in downlink ports. Please suggest.

1 Accepted Solution

Accepted Solutions

Hello @inhamit,

You're welcome.

Here: https://tmgmatrix.cisco.com/

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

View solution in original post

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

What speed?  1-, 10- or 40 Gbps?

inhamit
Level 1
Level 1

Please suggest for 1 and 10 both.

1 Gbps:  GLC-T or GLC-TE

10 Gbps:  SFP-10G-T

M02@rt37
VIP
VIP

Hello @inhamit,

For C9300X-24Y-A model, you can use the Cisco SFP-10G-T-X module, which is a copper SFP  transceiver designed for 10 Gigabit Ethernet connectivity over copper cabling. It supports a maximum cable length of up to 30 meters.

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

Hi M02@rt37, Thanks. Do we have any compatibility matrix link where I can check type of SFP's supported with the particular switch model?

Hello @inhamit,

You're welcome.

Here: https://tmgmatrix.cisco.com/

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.