cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

169
Views
20
Helpful
4
Replies
Beginner

Core/Distribution/Access Oversubscription Ratio Calculation

Hi Tech Guys, 

 

Could you share some guide about calaculation Oversubscription ratio between Access to Distribution and Distribution to Core,

For example for Cisco 9400 per slot capacity is 80Gbps and and how can we use 24 Port 10G Moudule which is giving full capacity= 24x10= 240Gbps. how can we calculate oversubscription ratio. 

Thanks in Advance.  

4 REPLIES 4
VIP Mentor

Re: Core/Distribution/Access Oversubscription Ratio Calculation

hi
if its sup1 and the its maxed to 80 GB per slot and you have the full 24 ports running at 10GB then its a 3/1ratio of over subscription , 240/80

looks like only the 9404 running sup 1X or XY can do 240GB per slot

 

EDIT: corrected mine back to front , early mornings :)

VIP Advisor

Re: Core/Distribution/Access Oversubscription Ratio Calculation

Hi there,

The linecard oversubscription would be 240/80 which gives a ration of 3:1 .

 

The calculate the combined oversubscription through the layers, you multiply the ratios. eg:

Say you have an access ratio of 3:1 and an aggregation of 1.5:1  that would give 3*1.5 = 4.5:1

 

cheers,

Seb.

Beginner

Re: Core/Distribution/Access Oversubscription Ratio Calculation

Thanks Seb for reply,

 

So could u elaborate  if we have 

From Access(48X1G) Uplink 2x10G to distrubtion Switch &

disrtribution to Core uplink = 2x10G 

 

Access to Distrbution Oversubscription ratio:?

Distribution to Core oversubscription ratio:?

 

Thanks

 

 

VIP Advisor

Re: Core/Distribution/Access Oversubscription Ratio Calculation

The access layer will be 2.4:1 , but we need to know the linecard configuration for the aggregation switch, to work out the combined oversubscription.

 

cheers,

Seb.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards