hello Experts,
I'm bit confused whether the Cisco model 3500 (cisco WS-C3548-XL ) has the CRWS tool which provides GUI interface for configuring the switch. The reason i ask is the Security team have found the vulnerability in this device and suggested me to upgrade the current Crws version to CRWS 3.3.0 build 31. I see this tool is used in soho and 800 series router but not in cisco 3500. Yet, Im puzzled it might use in cisco 3500 series switches too and suggest if it is used ?
sh version
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes of memory.
Processor board ID FAB0547Y1DL, with hardware revision 0x00
Last reset from power-on
sh flash:
Directory of flash:/
2 -rwx 1749748 Apr 30 2001 10:54:49 c3500XL-c3h2s-mz-120-5.3.WC.1.bin
3 -rwx 94375 Apr 30 2001 10:54:49 c3500XL-diag-mz-120-5.3.WC.1
4 drwx 10176 Feb 28 1993 20:00:55 html
5 -rwx 272 Dec 31 1969 20:00:20 env_vars
165 -rwx 25 Oct 06 1993 22:00:58 snmpengineid
166 -rwx 7680 May 28 2010 09:39:03 vlan.dat
167 -rwx 12217 Jan 08 2013 11:05:34 config.text
3612672 bytes t
In reference i found this document for the CRWS 3.3.0 build
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20060712-crws#software
