dc switch

[rahman001]

Hi everyone,

please i need a part number of a cisco switch with the following spec:

A: - Cisco Switch With 48 port–

GENERAL SPECIFICATION

• i. Enterprise-access Layer 3 switching, including Open Shortest Path First (OSPF) for routed access
  
• ii. Each Switch should have 2 x -48 DC Power Supplier
  
• iii. Supporting VLAN and IP 6
  
• iv. At least Two x 1-Gb Ethernet uplinks
  
• v. Ensure data confidentiality with MACSec layer-2 encryption
  
• vi. Support non-stop communications with redundant power supplies and cooling fans
  
• vii. Minimize downtime with hot-swappable power supplies, cooling fans and network modules
  
• •viii. 1RU size
  
• ix. Preferred 35XX series
  

Though 35xx series is end of life but give me the latest switch that has the above specification.

br

sam

[dominic.caron · Accepted solution]

3560X

[rahman001]

Hi dominic,

i have check as well but i see that WS-C3560E-48TD-SD is equally a DC powered switch but will be eol by january 13th.

so what is the exact part number of the 3560X DC switch?

br

sam

[dominic.caron]

WS-C3560X-48T-E

That will give you a 48 ports switch with no POE and an AC power supply. You need to order 2 DC power supply and change it.

2 X C3KX-PWR-440W

For the uplinks, you would need

1 X C3KX-SM-10G

The uplink module will give you macsec for the uplink will operate at 1 Gbps of 10 Gbps with SFP or SFP+ optic.

[ALIAOF_]

Plus it is not EOL either