09-22-2011 07:26 AM - edited 03-07-2019 02:22 AM
I have loaded an IOS update to a Cisco 3560 switch. After loading and cleanup I have a directory left over from the old IOS that causes me problems, but I can't delete it or the sub directory or file in it. Any suggestions would be appreciated. Shown below is from the CLI. c3560-ipservicesk9-mz.122-58.SE2.bin is the current IOS. Ignore the file dates. I had to do a password restore and load system defaults because the previous SA left a mess behind when he left.
Manny
Switch#dir flash:
Directory of flash:/
2 -rwx 616 Mar 1 1993 00:31:12 +00:00 vlan.dat
3 -rwx 15965969 Mar 1 1993 00:50:21 +00:00 c3560-ipservicesk9-mz.122-58.SE2.bin
4 -rwx 3096 Mar 1 1993 00:03:01 +00:00 multiple-fs
5 -rwx 1919 Mar 1 1993 00:03:06 +00:00 private-config.text
6 drwx 128 Mar 1 1993 00:21:40 +00:00 c3560-ipservices-mz.122-35.SE5
464 -rwx 2573 Mar 1 1993 00:03:06 +00:00 config.text
32514048 bytes total (14361600 bytes free)
Switch#dir flash:/c3560-ipservices-mz.122-35.SE5
Directory of flash:/c3560-ipservices-mz.122-35.SE5/
8 drwx 4160 Mar 1 1993 00:09:15 +00:00 html
463 -rwx 440 Mar 1 1993 00:09:52 +00:00 info
32514048 bytes total (14361600 bytes free)
Switch#del /force flash:/c3560-ipservices-mz.122-35.SE5:info
%Error deleting flash:/c3560-ipservices-mz.122-35.SE5:info (No such file or directory)
Switch#delete /force flash:c3560-ipservices-mz.122-35.SE5
%Error deleting flash:c3560-ipservices-mz.122-35.SE5 (Is a directory)
Solved! Go to Solution.
09-22-2011 07:30 AM
Hi,
Can you try the below command
delete /force/recursive flash:/c3560-ipservices-mz.122-35.SE5/c3560-ipservices-mz.122-35.SE5.bin
Hope this helps
Cheers
Somu
Rate helpful posts
09-22-2011 07:30 AM
Hi,
Can you try the below command
delete /force/recursive flash:/c3560-ipservices-mz.122-35.SE5/c3560-ipservices-mz.122-35.SE5.bin
Hope this helps
Cheers
Somu
Rate helpful posts
09-22-2011 07:47 AM
BINGO!!!!!!
delete /force/recursive flash:/c3560-ipservices-mz.122-35.SE5/c3560-ipservices-mz.122-35.SE5.bin
worked like a champ!
Saw it first , so I didn't get a chance to try del /force flash:/ c3560-ipservices-mz.122-35.SE5/info. It may have worked too, but no way I'm going backwards to find out.
Thanks for the help.
Manny
09-22-2011 07:39 AM
Hi,
del /force flash:/c3560-ipservices-mz.122-35.SE5:info
%Error deleting flash:/c3560-ipservices-mz.122-35.SE5:info (No such file or directory)
it should be
del /force flash:/ c3560-ipservices-mz.122-35.SE5/info
If somu command doesn't work then delete both files in the directory this way then delete the empty directory and it should work.
Regards.
Alain.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide