04-05-2008 04:57 AM - edited 03-05-2019 10:12 PM
Hi all, can anyone tell me how come that if the dhcp server is sent a request from one of my vlans, and this comes from the vlan L3 interface, how come the dhcp server knows what scope to give out?
04-05-2008 05:44 AM
Hi
It is going to use the source address subnet of u r SVI and according to it is going to assign the IP.
Thanks
Mahmood
04-05-2008 06:01 PM
It adds whar is call a GADDR (gateway address) to the packet which is what the DHCP server looks for the appropriate subnet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide