01-15-2014 08:28 AM - edited 03-07-2019 05:35 PM
I am having issues with getting clients to obtain a static DHCP binding which I have applied on the site Core switch (also acting as the site DHCP server).
-------------------------------
CoreSwitch#show run
!
ip dhcp pool xxxx
network 10.100.1.0 255.255.255.0
default router 10.100.1.1
domain-name xxxx
dns-server 10.x.x.x 10.x.x.x 8.8.8.8
!
ip dhcp pool binding_x
host 10.100.1.44 255.255.255.0
client-identifier d4c9.ef50.9e10
client-name x
-----------------------------
Troubleshooting steps followed so far:
1. issue a 'clear ip dhcp binding 10.100.1.216' on the the core switch
2. perform an ipconfig /release & /renew on the Windows 7 client laptop
3. reboot the laptop
4. Substituted the 'client-identifer' field with the 'hardware-address' field in the config (and also repeated steps 1-3)
No matter what, the client machine keeps getting the orginal DHCP lease it had before the binding was cleared (10.100.1.216).
Does anyone have any other ideas on how to solve this issue? Thanks!! :-)
01-15-2014 10:07 AM
What Happen if u exclude the IP from the DHCP offer, do he get another one?
Sent from Cisco Technical Support iPad App
01-15-2014 01:08 PM
Hi,
do this:
clear ip dhcp binding 10.100.1.216
ip dhcp pool binding_x
no client-identifier d4c9.ef50.9e10
client-identifier 01d4c9.ef50.9e10
Regards
Alain
Don't forget to rate helpful posts.
01-16-2014 01:58 AM
Hi Sebatsian & Alain,
Thanks for your advice, I've tried both of your suggestions, but it's still not working... the PC is now getting 10.100.1.225 (as opposed to .216)
Any other ideas?
Thanks!
Matt
01-16-2014 05:11 AM
Hi Sebastian & Alain,
I've now figured this out, the configuration appears to require the '01' appended to the start of the MAC address to recognise that the client media type is using an Ethernet controller, without this the DHCP server wasn't recognising the DHCP request from the client.
All working now, thanks for your input! :-)
Matt
01-16-2014 05:40 AM
Hi Matt,
This is exactly what I told you to do in my previous reply:
Hi,
do this:
clear ip dhcp binding 10.100.1.216
ip dhcp pool binding_x
no client-identifier d4c9.ef50.9e10
client-identifier 01d4c9.ef50.9e10
Regards
Alain
Regards
Alain
Don't forget to rate helpful posts.
01-16-2014 07:15 AM
Hi Alain,
Apologies, I did not pick up on that in your initial reply, but yes you are correct!
Thank you.
Matt
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide