01-13-2023 02:54 PM - edited 01-13-2023 03:02 PM
Hi i am using ip address 192.16.0.0 to 192.16.0.31 and it is not popping up in my end devices
The password for entering the server is Pa55 and the enable password is the host name
01-13-2023 02:55 PM
here is the link to my packet tracer
01-15-2023 05:20 PM
Hi @w012140m ,
There are a few things to change in this lab to get one of the end devices on the left to acquire an ip address from the DHCP pool.
- The DHCP pool needs to be configured on the router (MC-R1) rather than on the switch (MC-MLS1)
- on MC-R1, the subinterfaces for VLAN 20,40, 60 and 80 are configured on interface gi0/0/1, but should be configured on interface gi0/0/0, which faces MC-MLS1.
- All links between the switches and between the switches and the routers need to be configured as trunks, rather than access.
- Since the pool you configured is for VLAN 20, you need to configure at lease one of the end devices on the left in VLAN 20. There is currently none.
- on MC-R2, you configured the exact same IP addresses for the VLAN 20, 40,60, 80 as you configured on MC-R1. This is incorrect.
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide