08-11-2014 11:33 PM - edited 03-07-2019 08:21 PM
Issue:
DHCP is not working in my network between two different vlans even after configuring ip helper-address in the switch. Provided below the configuration of switch. Please help to identify the problem:
DHCP Server is part of vlan 100, primary - x.y.112,141 and secondary - x.y.112.142.
XYZABCDMZ-SW2#sh run
Building configuration...
Current configuration : 24037 bytes
!
version 12.2
no service pad
service tcp-keepalives-in
service timestamps debug datetime msec show-timezone
service timestamps log datetime msec show-timezone
service password-encryption
!
hostname XYZABCDMZ-SW2
!
boot-start-marker
boot-end-marker
!
logging buffered 5000 informational
!
!
aaa new-model
!
--More-- !
aaa authentication login default group tacacs+ local
aaa authentication login LOCAL local
aaa authentication dot1x default group radius
aaa authorization exec default group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
!
!
!
aaa session-id common
clock timezone gmt -6
clock summer-time GMT recurring
switch 2 provision ws-c3750x-48
system mtu routing 1500
authentication mac-move permit
no ip subnet-zero
no ip source-route
no ip domain-lookup
ip domain-name XYZABC.com
!
!
dot1x system-auth-control
!
spanning-tree mode rapid-pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
spanning-tree etherchannel guard misconfig
spanning-tree extend system-id
spanning-tree uplinkfast
spanning-tree backbonefast
!
!
!
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause channel-misconfig (STP)
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
--More-- errdisable recovery cause link-flap
errdisable recovery cause sfp-config-mismatch
errdisable recovery cause gbic-invalid
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause storm-control
errdisable recovery cause arp-inspection
errdisable recovery cause loopback
errdisable recovery interval 30
!
vlan internal allocation policy ascending
vlan dot1q tag native
!
!
!
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface FastEthernet0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
--More-- !
interface GigabitEthernet2/0/1
switchport access vlan 10
switchport mode access
switchport nonegotiate
switchport port-security
switchport port-security violation restrict
storm-control broadcast level 3.00
storm-control multicast level 3.00
spanning-tree portfast
spanning-tree guard root
!
interface GigabitEthernet2/0/2
switchport access vlan 10
switchport mode access
switchport nonegotiate
switchport port-security
switchport port-security violation restrict
shutdown
authentication port-control auto
dot1x pae authenticator
storm-control broadcast level 3.00
storm-control multicast level 3.00
--More-- spanning-tree portfast
spanning-tree guard root
!
interface GigabitEthernet2/0/43
!
interface GigabitEthernet2/0/44
!
interface GigabitEthernet2/0/45
switchport access vlan 10
shutdown
!
interface GigabitEthernet2/0/46
switchport access vlan 100
!
interface GigabitEthernet2/0/47
switchport access vlan 10
switchport mode access
!
--More-- interface GigabitEthernet2/0/48
switchport access vlan 100
!
interface GigabitEthernet2/1/1
description XYZABCDMZ-SW1
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet2/1/2
shutdown
!
interface GigabitEthernet2/1/3
description XYZABCDMZ-SW2
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet2/1/4
switchport trunk encapsulation dot1q
switchport mode trunk
shutdown
!
interface TenGigabitEthernet2/1/1
!
--More-- interface TenGigabitEthernet2/1/2
!
interface Vlan1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Vlan10
ip address x.y.116.19 255.255.252.0
ip helper-address x.y.112.142
ip helper-address x.y.112.141
no ip route-cache
no ip mroute-cache
!
interface Vlan100
ip address x.y.112.151 255.255.255.192
no ip route-cache
no ip mroute-cache
!
ip default-gateway x.y.116.1
ip classless
no ip http server
--More-- ip http secure-server
!
ip sla enable reaction-alerts
logging x.y.116.144
logging x.y.112.144
access-list 1 permit x.y.112.144
access-list 4 permit x.y.112.142
tacacs-server timeout 30
--More-- !
line con 0
exec-timeout 5 0
logging synchronous
login authentication LOCAL
line vty 0 4
access-class 1 in
exec-timeout 5 0
logging synchronous
transport input ssh
line vty 5 15
exec-timeout 5 0
logging synchronous
transport input ssh
!
!
monitor session 1 source interface Gi2/0/47
monitor session 1 destination interface Gi2/0/43
monitor session 2 source interface Gi2/0/48
monitor session 2 destination interface Gi2/0/44
ntp clock-period 36026795
ntp server x.y.94.11
end
--More--
XYZABCDMZ-SW2# exi
08-12-2014 07:14 AM
Hi,
There are many reasons why this may not be working.
Have you looked at the DHCP server itself.
Can it ping the vlan 100 & 10 addresses
Have the scopes been set set up correctly
Regards
Alex
08-12-2014 07:25 AM
It might be helpful if the originl poster would post the output of show vlan from the switch.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide