03-10-2007 06:54 PM - edited 03-05-2019 02:49 PM
I want to add DHCP on a 6509 MSFC. The issue is I only want to contain the ip address allocation to one vlan on the MSFC. Another concern is that this server doesn't take over our network. We have server's that hand out ip's to our other VLAN's.
03-10-2007 09:33 PM
Hi Dwayne,
Just create only one DHCP poolf on your MSFC for the vlan that you want the dynamic Ip address aloocation.This will relaese the IP's for the specific vlan in the questions.
I didnt undersatnd your last part of the question.please explain it in brief.
HTH,
-amit singh
03-11-2007 04:51 AM
I was just concerned about other vlan's making requests to this dhcp server. Can I get help with a sample config.
Thanks
03-11-2007 09:31 AM
For example, the VLAN you are planning to configure DHCP pool is VLAN1 and has an IP Address of 192.168.0.0/16
!
ip dhcp excluded-address 192.168.0.100
ip dhcp excluded-address 192.168.1.100
ip dhcp excluded-address 192.168.0.200
ip dhcp excluded-address 192.168.1.200
!
ip dhcp pool 1
network 192.168.0.0 /16
domain-name sample.com
dns-server 192.168.0.100 192.168.1.100
netbios-name-server 192.168.0.200 192.168.1.200
default-router 192.168.0.1
lease 30
netbios-node-type h-node
!
interface vlan1
ip address 192.168.0.1 255.255.0.0
Only hosts connected in VLAN1 will get IP Address from DHCP Pool0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide