01-22-2013 09:53 PM - edited 03-07-2019 11:15 AM
Hi
I configure some commands on the 3750 as follow:
interface Vlan401
description PC_VLAN01
ip address 192.168.150.2 255.255.255.0 secondary
ip address 10.25.125.2 255.255.255.0
standby 1 ip 10.25.125.1
standby 1 priority 150
standby 1 preempt
standby 2 ip 192.168.150.1
standby 2 priority 150
standby 2 preempt
interface Vlan411
description IP-PHONE_VLAN01
ip address 10.25.134.130 255.255.255.128
ip helper-address 10.25.125.4
standby 2 ip 10.25.134.129
standby 2 priority 150
standby 2 preempt
The dhcp server is windows 2002
The NIC ip address is 10.25.125.4 255.255.255.0
Configure three pools on the windows 2002
The frist pool 10.25.125.0/24 The second pool 192.168.150.0/24 The third 10.25.134.128/25
l had binded 10.25.125.0/24 to the special PCs . I hope that the other PCs can get 192.168.150.0/24
But in fact the other PCs get 10.25.134.128/25
why?
01-22-2013 10:12 PM
Hello Hongda,
Please follow the following discussion,
I think their answers expose this on a very good way
Afterwards let me know if you have any question:
https://supportforums.cisco.com/thread/2142481
Regards
01-22-2013 11:08 PM
Hi jcarvaja
first of all, thanks for your reply.
I read the documentation
They that discuss the case are different with my case.
My case are dhcp agent relay(ip helper-address) and ip address secondary
as you mentioned
agent relay to allcate ip address - frist prime subnet(10.25.125.0) ,second prime net (10.0.0.0) ,final other subnet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide