dhcp-server & trust on the same device!

[benahmeddaho_MOURAD]

Hi, EveryOne!
how to configure dhcp snooping in the situation as follows:
devices connected to a multilayer switch and this last is the dhcp server for them !

cordially!

[Reza Sharifi]

Hi,

To enable it for layer-2 vlan

ip dhcp snooping

ip dhcp snooping vlan x

On the access ports, you can add

ip dhcp snooping limit rate xx

HTH

[MHM Cisco World · Accepted solution]

Here config all port as untrusted “which is default”

no need trust port here