06-15-2012 12:16 PM - edited 03-07-2019 07:16 AM
Hello All,
I have 2 Nexus 7010 with 2 (chassis A and chassis B) supervisors each one and i will upgrade a NX-OS from 4.2(4) to 4.8(2). I plan upgrade chassis A and after chassis B. In each chassis have 4 VDCs and 2 VPc domains. After completing the upgrade in chassis A i will have chassis A with NX-OS 4.8(2) and chassis B with NX-OS 4.2(8). The VPc support different NX-OS versions?
Tks and regards,
Cristiano Viegas
06-15-2012 12:23 PM
The VPC support is the same with both versions.
BTW, it is recommend to have 2 sup per chassis not 1
HTH
Sent from Cisco Technical Support iPhone App
06-15-2012 12:30 PM
Hi Reza,
Tks for your answer.
I have 2 supervisors per chassi. My question is: The VPc form adjacency with different NX-OS releases? For example:
chassis A (NX-OS 4.8(2) ) and chassis B (NX-OS 4.2(4) ).
It´s possible?
Tks and regards.
Cristiano Viegas
06-15-2012 03:35 PM
Hi Viegas
Use ISSU to upgrade your set
On the Nexus upgrading code Is a lot simpler then upgrading 6500 VSS
HTH
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide