Hi
The attached config is configured on our cisco 887VAG. We are able to establish connect with our ISP (Vodafone Ghana) when NAT is enable on the ATM0.1 interface. But are not able to establish connection when NAT is disabled using the same configuration.
We want to use the device as ADSL modem only, without any NAT configuration. The public IP issued by our ISP is
197.251.215.81/29. We want to use
197.251.215.81/29 to establish a WAN connection with our ISP, while the others (197.251.215.82 –197.251.215.86) will be use on our dedicated servers.
