Hello
we have N7k , IOS ver n7000-s2-dk9.6.2.12
connected other port due to issued port down (2/6 --> 1/7)
i want to know which problem following the log has.
------# show logging
2015 Aug 29 21:59:45 ------ %R2D2_USD-SLOT2-2-R2D2_SYSLOG_CRIT: Disabling R2D2 interrupt using EEM :5, r2d2_TMC_fatal_intr
2015 Aug 29 21:59:46 ------ %R2D2_USD-SLOT2-2-R2D2_SYSLOG_CRIT: Reset R2D2 asic using EEM to recover from Fatal Interrupt :5, r2d2_TMC_fatal_intr
2015 Aug 29 21:59:47 ------ %MODULE-2-MOD_SOMEPORTS_FAILED: Module 2 (Serial number: 0000000000) reported failure on ports Ethernet2/6 (Ethernet)
due to R2D2 : Fatal interrupt! in device DEV_R2D2_ASIC (device error 0xc600520f)
------# show interface counters errors
--------------------------------------------------------------------------------
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
--------------------------------------------------------------------------------
mgmt0 0 0 -- -- -- --
Eth1/1 0 0 0 0 0 0
Eth1/2 0 0 0 0 0 0
Eth1/3 0 0 0 0 0 0
Eth1/4 0 0 0 0 0 0
Eth1/5 0 0 0 0 0 0
Eth1/6 0 0 0 0 0 0
Eth1/7 0 0 0 0 0 0
Eth1/8 0 0 0 0 0 0
Eth2/1 0 0 0 0 0 0
Eth2/2 0 0 0 0 0 0
Eth2/3 0 0 0 0 0 0
Eth2/4 0 0 0 0 0 0
Eth2/5 0 0 0 0 0 0
Eth2/6 0 0 79 0 0 0
Eth2/7 0 0 0 0 0 0
Eth2/8 0 0 0 0 0 0
--------------------------------------------------------------------------------
Port Giants SQETest-Err Deferred-Tx IntMacTx-Er IntMacRx-Er Symbol-Err
--------------------------------------------------------------------------------
mgmt0 0 0 0 0 0 0
Eth1/1 0 -- 0 0 0 0
Eth1/2 0 -- 0 0 0 0
Eth1/3 0 -- 0 0 0 0
Eth1/4 0 -- 0 0 0 0
Eth1/5 0 -- 0 0 0 0
Eth1/6 0 -- 0 0 0 0
Eth1/7 0 -- 0 0 0 0
Eth1/8 0 -- 0 0 0 0
Eth2/1 0 -- 0 0 0 0
Eth2/2 0 -- 0 0 0 0
Eth2/3 0 -- 0 0 0 0
Eth2/4 0 -- 0 0 0 0
Eth2/5 0 -- 0 0 0 0
Eth2/6 0 -- 0 79 0 0
Eth2/7 0 -- 0 0 0 0
Eth2/8 0 -- 0 0 0 0
