cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
455
Views
0
Helpful
2
Replies

distribution switch logs

hi all,

these are the logs in my distribution switch which caused to reboot the switch..can someone just share what would be the root cause for this problem.

Aug 22 07:41:10 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.171.9 (Vlan508 0021.6a7e.137c) -> 224.0.0.22, 1 packet

Aug 22 07:41:16 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.63.57 (Vlan508 0021.6a49.d3c7) -> 224.0.0.22, 1 packet

Aug 22 07:41:22 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.0.252 (Vlan508 0024.d75a.eeb2) -> 224.0.0.22, 1 packet

Aug 22 07:41:26 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.135.195 (Vlan508 0021.6aaa.f946) -> 224.0.0.22, 1 packet

Aug 22 07:41:29 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.27.81 (Vlan508 0024.d723.9e7e) -> 224.0.0.22, 1 packet

Aug 22 07:41:40 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.172.20 (Vlan508 0021.6aa4.f451) -> 224.0.0.22, 1 packet

Aug 22 07:41:48 UTC: %SEC-6-IPACCESSLOGRP: list 169 denied igmp 10.254.102.26 (Vlan508 0024.d723.8da4) -> 224.0.0.22, 1 packet

Aug 22 07:41:53 UTC: %SEC-6-IPACCESSLOGRL: access-list logging rate-limited or missed 25 packets

VKS

2 Replies 2

Derek Zhang
Cisco Employee
Cisco Employee

It's quite werid that the ACL deny will cause the switch reload.

Any log indicate the msg cause the switch reload?

probably you can find any clue from show tech e.g. crashfile, crash process, reload reason

I would agree with Dazhi that it would be really strange that the ACL logging would have caused the switch to reload. We would need to check for either a crashinfo or looking at the complete logs from the syslog (if configured) would help identifying the root cause. If there is nothing in the logs except these messages & switch didn't crash, let us know. We can look for a known bug.

Regards,

Amit

Review Cisco Networking products for a $25 gift card