Dot1x and WoL on multi-auth port

[SMD28316]

I want to use Wake on LAN on a switch. On the config guide, it says it is supported only on ports configured in 802.1X single-host, multi-host and multi-domain modes. However for switches like C3650 switch, someone mentioned that he succeeded with doing exactly that (I'E configuring WoL with dot1x under a multi-auth port)

Is there any documentation that lists that switches that are capable of doing so? How do I know if my switch is capable of exactly that? I use a c9200 switch.

[Reza Sharifi]

According to this config guide, the feature is supported starting with Cisco IOS XE 3.2SE

See document for config example:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-9/configuration_guide/sec/b_169_sec_9200_cg.pdf

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_8021x/configuration/xe-3se/3850/sec-user-8021x-xe-3se-3850-book/sec-ieee-wake-lan-supp.pdf

HTH

[SMD28316]

Thank you for your reply, but I can't find where Wol and multi-auth are mentioned in the documents.

Can you tell me in what section(s)?