Dynamic IP from provider

[cisco.plus]

Hi

connected DSL directly to 2900 series router , but as DSL public IP is not static (dynamic)  its difficult to access Router when out of home,  any other means to access router without static IP

thanks

CP

[jeffs7]

Yes, you can do this with Dynamic DNS registration.  Basically what it does is your router will update a DNS resource record with its own ip address.  Take a look at this documet on how to configure it:

http://www.cisco.com/en/US/docs/ios/12_3/12_3y/12_3ya8/gt_ddns.html

Hope this helps.

Jeff Stevens

[jawad-mukhtar]

You can access your router from any where if u local / public ip is pingable.

Just u have to do is that if you have applied access-list on your vty just allow your public ip in that.

Else you can create Remote Site VPN and can access your route after connecting VPN.

** Do Rate Helpful Posts **