Dynamic VLAN assignment with ACS and Microsoft AD

[maucapina]

Hi

Please someone can provide me with material for a project of switching, I need to have information relating to the implementation of dynamic VLANs across the campus of a network of local government. I found information but all are focused on wireless environments, and I need something concrete for wired LAN environments. The network will consist of equipment such as: 4500, 3560 and 2960 catalyst switches, Cisco Secure ACS Appliance, and Microsoft Active Directory. All users within the network must obtain VLAN parameters dynamically around the campus.

Thanks for your help

Marcelo

[andrew.prince]

Have a look at the below links:-

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_9_ea1/configuration/guide/Sw8021x.html

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a00808066ba.shtml#switch

HTH>

[maucapina]

Thanks Andrew

I will review the information, it is useful to me, but the documentation should be focused on the use of external database such as Microsoft AD.

Marcelo

[Ganesh Hariharan]

Thanks Andrew
I
will review the information, it is useful to me, but the documentation
should be focused on the use of external database such as Microsoft AD.
Marcelo

Hi Marcelo,

Check out the below link for configuring of 802.1x authentication and assignement of vlan using ACS.

https://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_50_se/configuration/guide/sw8021x.html

Hope to help !!

Ganesh.H

[maucapina]

Thanks Ganesh