Hello,
i have to configure 80 Cisco 876 routers, so i planned to copy config via tftp from one configured router to PC, edit it in text editor (change ip addresses, dhcp pools, vpn keys...) and then copy it via tftp to another router, etc... Configuration looks fine and it works when i paste it in cli, but when i copy it via tftp i'm getting strange problems like dhcp not working or snmp not accessible. Am I missing something.
Here's config from router with dhcp problem:
ROUTER#sh run
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname ROUTER
boot-start-marker
boot-end-marker
!
!
logging buffered 4000000
enable secret 4 *******************************
!
no aaa new-model
clock timezone GMT 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-733367932
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-733367932
revocation-check none
rsakeypair TP-self-signed-733367932
!
!
crypto pki certificate chain TP-self-signed-733367932
certificate self-signed 01
quit
dot11 syslog
no ip source-route
ip dhcp excluded-address 172.30.248.129
!
ip dhcp pool DHCP
network 172.30.248.128 255.255.255.240
default-router 172.30.248.129
domain-name **********
dns-server 192.168.0.3
lease 7
!
!
!
ip cef
no ip bootp server
ip domain name hpa
login block-for 120 attempts 2 within 100
login delay 10
login quiet-mode access-class PERMIT-SSH
login on-failure log
login on-success log
!
!
!
!
archive
log config
hidekeys
username USER privilege 15 secret 4 ***************************
!
!
ip tcp synwait-time 10
ip tftp source-interface Vlan2
ip ssh version 2
!
!
crypto isakmp keepalive 15 10 periodic
!
!
!
!
!
crypto ipsec client ezvpn ***********
connect auto
group TG_LOCATION_EasyVPN key ****************
mode network-extension
peer xxx.xxx.xxx.xxx
username USERNAME password ***********
xauth userid mode local
!
!
!
!
!
interface Null0
no ip unreachables
!
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
switchport access vlan 2
no ip address
spanning-tree portfast
!
interface FastEthernet2
switchport access vlan 2
no ip address
spanning-tree portfast
!
interface FastEthernet3
switchport access vlan 2
no ip address
spanning-tree portfast
!
interface Vlan1
description OUTSIDE
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
crypto ipsec client ezvpn *******
!
interface Vlan2
description INSIDE
ip address 172.30.248.129 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no autostate
crypto ipsec client ezvpn ****** inside
!
ip forward-protocol nd
no ip http server
ip http authentication local
ip http secure-server
!
!
ip access-list standard PERMIT-SSH
permit xxx.xxx.xxx.xxx
permit xxx.xxx.xxx.xxx
ip access-list standard SNMP_PERMIT
permit xxx.xxx.xxx.xxx
!
!
logging source-interface Vlan2
logging xxx.xxx.xxx.xxx
logging xxx.xxx.xxx.xxx
no cdp run
!
!
!
snmp-server community ***********************
snmp-server location ***************
!
control-plane
!
banner login ^C
******************************************************************************
^C
!
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line vty 0 4
access-class PERMIT-SSH in
login local
transport input telnet ssh
!
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
ntp server xxx.xxx.xxx.xxx
end
