cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
814
Views
0
Helpful
5
Replies

Efsu config

rc.castillo
Beginner
Beginner

hi,

     Does anyone has an actual config for performing eFsu for a VSS system?

     I already have a document i just want to verify.

     Thanks.

5 REPLIES 5

Reza Sharifi
Hall of Fame Expert Hall of Fame Expert
Hall of Fame Expert

Hi Rc,

Make sure to follow the config guide (below) to deploy eFSU for your VSS system.  It works really well if you follow it step by step.  You should not have down time.  Just one thing to remember that eFSU works well when you are upgrading from a major release to another major release and not a minor to major.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/issu_efsu.html#wp1042706

Good luck.

Reza

HI Reza,

1. Router> enableway to

2.copy tftp bootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin
  copy tftp slavebootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin

3.show version | inc image
  show bootvar
  show redundancy
  show issu state detail

4. issu loadversion bootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin

5. show issu outage slot all

6  issu-runversion

7. issu acceptversion

8. issu commitversion

9. show redundancy
   show issu state detail

   is this the right implement efsu? and what do you mean by minor to a major release? im upgrading from SXI to SXI2a

rc.castillo wrote:

HI Reza,

1. Router> enableway to

2.copy tftp bootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin
  copy tftp slavebootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin

3.show version | inc image
  show bootvar
  show redundancy
  show issu state detail

4. issu loadversion bootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin

5. show issu outage slot all

6  issu-runversion

7. issu acceptversion

8. issu commitversion

9. show redundancy
   show issu state detail

   is this the right implement efsu? and what do you mean by minor to a major release? im upgrading from SXI to SXI2a

Hi RC,

By minor to major, I mean if you are going for example from SXI2a SXI3 is does not work, but if you are going from SXI1 to SXI3 it or SXI2 to SXI3 it works fine. Since you are running SXI, I recommend going to SXI3 (latest version on CCO). and not SXI2a, because there a few bug fixes in SXI3 and seems to a good image. BTW, do not use SXI2 at all as it is a differed version.

HTH

Reza

Hi Reza,

     Is the config right with regards to performing EFSU

Hi RJ,

You need to copy the IOS into sup-bootdisk (primary VSS) and slavesup-bootdisk (backup VSS) and not into the boot flash, because the boot flash is only 64Mb by default and the IOS is 155Mb, so it will not fit into the boot flash.

Good Luck

Reza

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: