ehwic on cisco 2811

[jomo frank]

Hello Expert,

Can ehwic be use on cisco 2811?

I know this can be use on cisco 2901 routers

Regards

Jomo

[krahmani323 · Accepted solution]

Hello Jomo,

Not expert but I will try to answer :

1/ From this page  http://www.cisco.com/en/US/prod/collateral/modules/ps5949/qa_c67-612908.html

Q. Are there any restrictions or considerations I should be aware of?

A Yes, Following is a summary of a few limitations when using the EHWIC switch:

• The EHWIC switch is not supported on older ISR platforms (Cisco 1841 and Cisco 2800 and 3800 Series).

############""

2/ http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/geSwitchEhwic_hw.pdf says :

Cheers!

Karim