Dear all,
I'am trying to add FEX FABRIC to my N9K 9396 PX.
I'have plugged port 1 on N9K and port 1 fiber to N2K 2248TP.
I'have also do configuration on my N9K but I can't see interfaces of the N2K, but I see N2K.
N9K-PAR-2(config-if)# show interface fex-fabric
Fabric Fabric Fex FEX
Fex Port Port State Uplink Model Serial
---------------------------------------------------------------
101 Eth1/1 Configured 1 N2K-C2248TP-E-1GE FOX1924H7MR
N9K-PAR-2(config-if)#
fex 101
pinning max-links 1
description "N2K"
interface Ethernet1/1
switchport mode fex-fabric
fex associate 101
"Show fex detail" return anything.
N9K-PAR-2(config-if)# sh logging last 30
2021 Oct 21 21:18:57 N9K-PAR-2 %ETHPORT-5-IF_DOWN_CFG_CHANGE: Interface Ethernet1/1 is down(Config change)
2021 Oct 21 21:18:59 N9K-PAR-2 %ETHPORT-5-SPEED: Interface Ethernet1/1, operational speed changed to 10 Gbps
2021 Oct 21 21:18:59 N9K-PAR-2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/1, operational duplex mode changed to Full
2021 Oct 21 21:18:59 N9K-PAR-2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/1, operational Receive Flow Control state changed to off
2021 Oct 21 21:18:59 N9K-PAR-2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/1, operational Transmit Flow Control state changed to off
2021 Oct 21 21:18:59 N9K-PAR-2 %ETHPORT-5-IF_UP: Interface Ethernet1/1 is up in Layer3
2021 Oct 21 21:19:51 N9K-PAR-2 %ETHPORT-5-IF_DOWN_CFG_CHANGE: Interface Ethernet1/1 is down(Config change)
2021 Oct 21 21:19:53 N9K-PAR-2 %ETHPORT-5-SPEED: Interface Ethernet1/1, operational speed changed to 10 Gbps
2021 Oct 21 21:19:53 N9K-PAR-2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/1, operational duplex mode changed to Full
2021 Oct 21 21:19:53 N9K-PAR-2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/1, operational Receive Flow Control state changed to off
2021 Oct 21 21:19:53 N9K-PAR-2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/1, operational Transmit Flow Control state changed to off
2021 Oct 21 21:19:53 N9K-PAR-2 %ETHPORT-5-IF_UP: Interface Ethernet1/1 is up in mode access
2021 Oct 21 21:19:57 N9K-PAR-2 %ETHPORT-5-IF_DOWN_CFG_CHANGE: Interface Ethernet1/1 is down(Config change)
2021 Oct 21 21:19:59 N9K-PAR-2 %ETHPORT-5-SPEED: Interface Ethernet1/1, operational speed changed to 10 Gbps
2021 Oct 21 21:19:59 N9K-PAR-2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/1, operational duplex mode changed to Full
2021 Oct 21 21:19:59 N9K-PAR-2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/1, operational Receive Flow Control state changed to off
2021 Oct 21 21:19:59 N9K-PAR-2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/1, operational Transmit Flow Control state changed to off
2021 Oct 21 21:19:59 N9K-PAR-2 %ETHPORT-5-IF_UP: Interface Ethernet1/1 is up in mode access
2021 Oct 21 21:21:16 N9K-PAR-2 %ETHPORT-5-IF_DOWN_CFG_CHANGE: Interface Ethernet1/1 is down(Config change)
2021 Oct 21 21:21:18 N9K-PAR-2 %ETHPORT-5-SPEED: Interface Ethernet1/1, operational speed changed to 10 Gbps
2021 Oct 21 21:21:18 N9K-PAR-2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/1, operational duplex mode changed to Full
2021 Oct 21 21:21:18 N9K-PAR-2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/1, operational Receive Flow Control state changed to off
2021 Oct 21 21:21:18 N9K-PAR-2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/1, operational Transmit Flow Control state changed to off
2021 Oct 21 21:21:24 N9K-PAR-2 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 1 of Fex 101 that is connected with Ethernet1/1 changed its status from Created to Configured
2021 Oct 21 21:21:24 N9K-PAR-2 %ETHPORT-5-IF_DOWN_INITIALIZING: Interface Ethernet1/1 is down (Initializing)
2021 Oct 21 21:21:26 N9K-PAR-2 %ETHPORT-5-SPEED: Interface Ethernet1/1, operational speed changed to 10 Gbps
2021 Oct 21 21:21:26 N9K-PAR-2 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/1, operational duplex mode changed to Full
2021 Oct 21 21:21:26 N9K-PAR-2 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/1, operational Receive Flow Control state changed to off
2021 Oct 21 21:21:26 N9K-PAR-2 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/1, operational Transmit Flow Control state changed to off
2021 Oct 21 21:21:26 N9K-PAR-2 %ETHPORT-5-IF_DOWN_NONE: Interface Ethernet1/1 is down (None)
N9K-PAR-2(config-if)#
Anyone have an idea ? I really need to configure this FEX FABRIC for my customer.
Thanks !
Axel
