enabling SNMP Authentication Failed log message in IOS-XR/IOS-XE/IOS devices

[from88]

Hello,

Can anyone advice me how to enable SNMP-AUTH-FAIL message on these devices ?
on NX-OS - i did it with simple command - logging level snmpd 6.

But can't get that working with IOS-XE/IOS-XR devices.

[from88]

Can anyone advice me how to enable SNMP-AUTH-FAIL message on these devices ?
on NX-OS - i did it with simple command - logging level snmpd 6.

But can't get that working with IOS-XE/IOS-XR devices.

[Reza Sharifi]

Try adding aaa authentication login error-enable and test again.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_aaa.html#wp1281748

HTH

[from88]

thanks, that command is on NX-OS devices. I dont have a problem with NX-OS.

The only problem is with IOS-XR/IOS-XE and IOS. Can you help ? Thanks