EPLD upgrade

[Rosa Ladeira]

n7000-s1-epld.5.2.3.img image povides enhancements for N7K-M148GT-11 and N7K-132XP-12 modules.

I would like to upgrade, but there is no current epld image on N7K dir.

nx7000-wc0# dir

        322    Aug 10 20:22:11 2011  MDS20110704132644478.lic

     860155    Nov 18 10:53:20 2011  ethpm_vlan_tech.log

      16384    Nov 12 17:41:01 2010  lost+found/

  145781260    Nov 12 17:42:50 2010  n7000-s1-dk9-npe.5.1.1.bin

   93421568    Dec 29 12:33:28 2012  n7000-s1-dk9-npe.5.2.7.bin

   30456320    Nov 12 17:42:00 2010  n7000-s1-kickstart-npe.5.1.1.bin

   29329408    Dec 29 09:48:17 2012  n7000-s1-kickstart-npe.5.2.7.bin

      69387    Dec 06 14:16:15 2012  startup-config

       4096    Nov 12 18:18:26 2010  vdc_2/

       4096    Nov 12 18:18:26 2010  vdc_3/

       4096    Nov 12 18:18:26 2010  vdc_4/

       2116    Dec 20 22:11:19 2012  vlan.dat

Usage for bootflash://

  427298816 bytes used

1411559424 bytes free

1838858240 bytes total

nx7000-wc0#

In this case, if anything goes wrong there will be no chance to roolback ?

Thanks,

Rosa

[Reza Sharifi]

What is the current version of ELPD?

can you post "sh ver"

Remember, ELPD upgrade is disruptive to your network and ISSU can not be used for it.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/epld/epld_rn_5.2.pdf

HTH

[Rosa Ladeira]

Software

  BIOS:      version 3.22.0

  kickstart: version 5.1(1)

  system:    version 5.1(1)

  BIOS compile time:       02/20/10

  kickstart image file is: bootflash:///n7000-s1-kickstart-npe.5.1.1.bin

  kickstart compile time:  12/25/2020 12:00:00 [10/24/2010 07:25:25]

  system image file is:    bootflash:///n7000-s1-dk9-npe.5.1.1.bin

  system compile time:     9/2/2010 19:00:00 [10/24/2010 08:34:48]

Hardware

  cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")

  Intel(R) Xeon(R) CPU         with 4109596 kB of memory.

  Processor Board ID JAF1444BLKS

  Device name: nx7000-wc0

  bootflash:    2029608 kB

  slot0:              0 kB (expansion flash)

Kernel uptime is 8 day(s), 19 hour(s), 2 minute(s), 52 second(s)

Last reset at 668239 usecs after  Thu Dec 20 22:06:04 2012

  Reason: Reset triggered due to HA policy of Reset

  System version: 5.1(1)

  Service: SIGKILL failure of "pixm"

plugin

  Core Plugin, Ethernet Plugin

CMP (Module 5) ok

CMP Software

  CMP BIOS version:        02.01.05

  CMP Image version:       5.1(1) [build 5.0(0.66)]

  CMP BIOS compile time:   8/ 4/2008 19:39:40

  CMP Image compile time:  9/2/2010 19:00:00

nx7000-wc0#

----------------------------------------------------------------------------------------

nx7000-wc0# sh version mod 1 epld

EPLD Device                     Version

---------------------------------------

Power Manager                     4.008

IO                                1.015

Forwarding Engine                 1.006

FE Bridge(1)                     186.005

FE Bridge(2)                     186.005

Linksec Engine(1)                 2.006

Linksec Engine(2)                 2.006

Linksec Engine(3)                 2.006

Linksec Engine(4)                 2.006

Linksec Engine(5)                 2.006

Linksec Engine(6)                 2.006

Linksec Engine(7)                 2.006

Linksec Engine(8)                 2.006

---------------------------------------------------------------------------

nx7000-wc0# sh version mod 2 epld

EPLD Device                     Version

---------------------------------------

Power Manager                     4.008

IO                                1.016

Forwarding Engine                 1.006

FE Bridge(1)                     186.006

FE Bridge(2)                     186.006

Linksec Engine(1)                 2.007

Linksec Engine(2)                 2.007

Linksec Engine(3)                 2.007

Linksec Engine(4)                 2.007

Linksec Engine(5)                 2.007

Linksec Engine(6)                 2.007

Linksec Engine(7)                 2.007

Linksec Engine(8)                 2.007

nx7000-wc0#

----------------------------------------------------------------------------------------

nx7000-wc0# sh version mod 10 epld

EPLD Device                     Version

---------------------------------------

Power Manager                     5.006

IO                                2.013

Forwarding Engine                 1.006

nx7000-wc0#

-------------------------------------------------------------------------------

nx7000-wc0# sh version epld bootflash:

ERROR: Filename is empty

Incompatible EPLD image file.

-------------------------------------------------------------------------

nx7000-wc0# sh version xbar 1 epld

EPLD Device                     Version

---------------------------------------

Power Manager                     2.009

nx7000-wc0# sh version xbar 2 epld

EPLD Device                     Version

---------------------------------------

Power Manager                     2.009

nx7000-wc0#

nx7000-wc0# sh version xbar 3 epld

EPLD Device                     Version

---------------------------------------

Power Manager                     2.009

nx7000-wc0#

----------------------------------------------------------------------------------

nx7000-wc0# sh version fan 1 epld

Internal error during command execution (11 8b)

nx7000-wc0#