Equivalent Config for T1 Module

[rsinghnyc]

I am in the process of replacing an Adtran NetVanta 3200 Router with a Cisco 1751. The 1751 has a 1DSU T1 WIC.

Here are the statements for the NetVanta regarding it's T1 WIC:

interface t1 1/1

tdm-group 1 timeslots 1-24 speed 64

no shutdown

!

!

interface fr 1 point-to-point

frame-relay lmi-type ansi

no shutdown

cross-connect 1 t1 1/1 1 frame-relay 1

!

interface fr 1.500 point-to-point

frame-relay interface-dlci 500

ip address xxx.xxx.xxx.xxx 255.255.255.xxx

Can someone please provide me with some guidance as to the equivalent statements on the 1751 Router?

[royalblues · Accepted solution]

here you go for the 1DSU T1

interface Serial0/0

bandwidth 1536

no ip address

encapsulation frame-relay IETF

service-module t1 timeslots 1-24

frame-relay lmi-type ansi

!

interface Serial0/1/0.1 point-to-point

ip address x.x.x.x y.y.y.y

frame-relay interface-dlci 500

http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a0080093c56.shtml

HTH

Narayan

[rsinghnyc]

I have added the statements above, and the configuration works. Thank you.