From the command promt, type:
show cfs lock >> which will show something similar to this:
Application: ntp
Scope : Physical-fc-ip
--------------------------------------------------------------------------------
Switch WWN IP Address User Name User Type
--------------------------------------------------------------------------------
20:00:50:87:89:4c:76:c2 0.0.0.0 admin CLI/SNMP v3
Note the application shown above is ntp. From the command prompt type:
show ntp status >> which will show something like this:
switch# sho ntp status
Distribution : Enabled
Last operational state: Commit operation failed
From the command prompt type:
clear ntp session and repeat the command 'show cfs lock'