Etherchanel...

[Debudas123]

                   How many etherchanel group i can configure in cisco WS-C2960S-24TS-S and WS-C3750X-12S-S ?

Reagrds

Debabrata

[Sandeep Choudhary]

HI Debudas,

2960 is limited to 6 etherchannels.

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_58_se/configuration/guide/swethchl.html#wp1275535

Its a hardware limitaion.You will not get more etherchannels even if you upgrade.

Regards

Please rate if it helps.

[Debudas123]

Okay ... i understad.....

Thanks ... so that i can use Channel-Group id 7, 9, 10 like this in 2960, there is no limitation in ID no., but maximum is 6.

Regards

Debabrata

[Sandeep Choudhary · Accepted solution]

hI Debdas,

so that i can use Channel-Group id 7, 9, 10 like this in 2960, there is no limitation in ID no.,but maximum is 6.

Yes you can use any number for a port channel.

yes you can create maximum 6  port-channel on 2960 switches and 48 port channel on 3750 switch.

If you are satisfied then please mark this question as answered!

Regards

Please rate it, if it helps.